How to sharpen blade. (Plane blade)

top | YARIKANA
Tool used
Rough grit water whetstone.
Medium grit water whetstone.
Super fine grit water whetstone.

It is flat whetstone whetstone.

A flat finish whetstone is necessary.
It uses it to sharpen a lower blade.
This is called KANABAN of Japan.

It is flat KANABAN.

The board made of iron or the article of cast metal is used in Japan.
I use the article of cast metal
It uses it for the whetstone and the same sprinkling water.
Especially, to sharpen the lower side of the chisel and the plane, it is very necessary.

A flat KANABAN is necessary.
It uses it to sharpen a lower blade.
Wate rspray.

Water atomiser.
spray,atomizer
Procedure for sharpening.
The upper part of the blade is sharpened.
roughly sharpens.

Rough grit water whetstone.

A flat whetstone is used.
Water is sprinkled on the whetstone.
The blade is moved back and forth and it sharpens it.

When moving the plane blade, you should keep even pressure on the edge of the blade.


KANABAN.

A flat KANABAN is used.
Rough emery is put on KNABAN.
Water is sprinkled on the whetstone.
The blade is moved back and forth and it sharpens it.
When moving the plane blade, you should keep even pressure on the edge of the blade.
The upper part of the blade is sharpened.
Medium sharpens
.

Medium grit water whetstone.

A flat whetstone is used.
Water is sprinkled on the whetstone.
The blade is moved back and forth and it sharpens it.

When moving the plane blade, you should keep even pressure on the edge of the blade.

KANABAN.

A flat KANABAN is used.
Medium emery is put on KNABAN.
Water is sprinkled on the whetstone.
The blade is moved back and forth and it sharpens it.
When moving the plane blade, you should keep even pressure on the edge of the blade.

Moreover,
It is possible to finish it up by using the stone dust.
The upper part of the blade is sharpened.
Finish sharpen.


Super fine grit water whetstone.

A flat whetstone is used.
Water is sprinkled on the whetstone.
The blade is moved back and forth and it sharpens it.
When moving the plane blade, you should keep even pressure on the edge of the blade.
The lower side of the blade is sharpened.
Finish sharpen.

Super fine grit water whetstone.

A flat whetstone is used.
The blade is moved back and forth and it sharpens it.
The blade should keep the whetstone flat.


KANABAN.

A flat KANABAN is used.
Stone dust is put on KNABAN.
The blade is moved back and forth and it sharpens it.
The blade should keep the KANABAN flat
top | YARIKANA